-
فیبر نوری جعبه ختم
-
فیبر نوری جعبه شکاف
-
فیبر نوری PLC Splitter
-
جعبه فیبر کابل مشترک
-
MTP MPO کابل
-
فیبر نوری Pigtail
-
کابل فیبر نوری پچ
-
آداپتور فیبر نوری
-
اتیناتور فیبر نوری
-
اتصال دهنده فیلد قابل نصب
-
قطره قطره کابل FTTH
-
پنل پچ فیبر نوری
-
فیبر نوری بسته شدن انشعاب
-
کیت ابزار فیبر
-
واحد شبکه نوری
-
کیت نصب کابل
-
آنتونیوجعبه فیبر نوری خوب، کیفیت خوب، بسته بندی خوب، خدمات خوب، منتظر سفارشات جدید من باشید. با تشکر
-
چاتایکابا تشکر از تحویل سریع شما در هر زمان، با همان کیفیت، همیشه با قیمت از من حمایت کنید، از حمایت ویژه هر بار از ما سپاسگزاریم. مثل شرکت شما، به زودی شما را در چین می بینم
-
کارلا لوئیسسوفی عزیز خیلی وقت است که صدای شما بسیار شیرین است و همیشه راه حل کامل و پاسخ فوری به ما ارائه می دهد و به ما کمک می کند تا تجارت بیشتر و بیشتری داشته باشیم، با تشکر
-
بنجامین فرناندومن از کیفیت شما بسیار راضی هستم، و شما همیشه سفارش من را به موقع تمام می کنید، امیدوارم در آینده تجارت بیشتری با شما انجام دهیم، و بازار ما در حال افزایش است، بیایید در ادامه کار کنیم
-
الخاندرو اسسلام دوست من، خوشحالم که برای مدت 8 سال با شما کار می کنم. و در این مدت چندین شعبه افتتاح کردیم، از حمایت شما متشکرم، اگرچه بازار کم است، اما حجم فروش ما در حال افزایش است، همه شما را دوست دارم
Fiber Optic Splice Closure 48 Core
برای نمونه و کوپن رایگان با من تماس بگیرید.
WhatsApp:0086 18588475571
ویچت: 0086 18588475571
اسکایپ: sales10@aixton.com
اگر نگرانی دارید، ما به صورت آنلاین 24 ساعته راهنمایی می کنیم.
xshape | Dome | max capacity | 48cores bunchy fibers |
---|---|---|---|
cable port | 4round ports | cable diameter | Φ8mm~Φ16 mm |
material | PC | splice tray qty | max. 4pcs |
closure dimension | 288*178 mm | weight | 2.0 kgs |
carton qty | 10 pcs | carton size | 80*43*35 mm |
برجسته | fiber optic splice enclosure,fiber optic joint closure,fiber optic joint closure |
FTTH Mini Dome Fiber Optic Splice Closure, Mechanical Splice Closure 48 Core
Sell point:
- Mechanical sealing
- Cable port: 4round ports
- Size:288*178 mm
- splice tray: 4 x 12 Fibers
- Max capacity: 48cores
- Cable diameter: Φ8mm~Φ16 mm
- Matreial: PC
Application: aerial, underground, pipeline,hand hole, wall mount, pole mount.
Operation conditions:
- Temperatures: -40℃~+65℃
- Humidity: ≤95% (at 40℃)
- Air Pressure: 70kPa ~106kPa
Technical Specifications:
1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the
models with the air hole), and then soak it in the water of normal temperature, after 15 minutes
of steady observation, there is no bubble to overflow.
2. Insulation resistance: the insulation resistance between the metal work piece and the earth is
greater than 20kMΩ.
3. Pressurization: there is no breakdown or flash over under 15kVdc/1min between the metal work
piece and the earth.
4. The curvature radius of the fiber 40mm, without extra loss inside the splice tray.
5. It can bear the axial tensile strength no less than 1000N.
6. Lifetime: 25 years.
7. Other performances are all in accordance with the requirement of standard YD/T814-1998.
Dimension and capacity
Outside dimension (Height x Diameter) |
288mm×178mm |
Weight (excluding outside box) |
1800g—1910g |
Number of inlet/outlet ports |
4 pieces |
Diameter of fiber cable |
Φ8mm~Φ16 mm |
Capacity of FOSC |
Bunchy: 4-48 (cores) |
FOSC cover size |
Height x Diameter: 208mm x 132mm |
Fiber optic splice tray (FOST) capacity |
Bunchy:4,6,8,12,(cores) |
Fiber holding tray |
1pc |
Accessory list:
No. |
item |
Usage |
1 |
Heat shrinkable protective sleeve |
Protecting fiber splices |
2 |
Nylon tie |
Fixing fiber with protective coat |
3 |
Earthing wire |
Putting through between earthing devices |
4 |
Abrasive cloth |
Scratching fiber cables |
5 |
Labeling paper |
Labeling fibers |
6 |
Special wrench |
Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube |
7 |
Measuring paper |
To measure perimeter, of which its diameter is enlarged with seal tape |
8 |
Seal tape |
Enlarging diameter of fiber cable which fits in with gasket ring. |
9 |
Insulation tape |
Enlarging diameter of fiber cable for easy fixing |
10 |
Metal hoop |
For wall mounting and pole hugging |
11 |
Buffer tube
|
Hitched to fibers and fixed with FOST, managing buffer. |
12 |
Desiccant |
Put into FOSC before sealing for desiccating air |